The ELRS-XL is our “Big Boy” tray system built specifically for the larger, heavier and fat tire trikes as well as larger, longer hand cycles. Usable space to carry a trike or hand cycle is ~40.5″ front to back and the wheel channels are 63” L to R. We limit the carry weight of ELT-XL to 145 pounds.
The trike transporting vehicles 2″ receiver hitch should have a have a ground clearance of about 16″. If not, a riser is required to make it so. Higher is OK. If a riser is required then it must also have a second Hitch Tite to secure it from moving.
The ELT-XL comes with running and brake lights as well as turn signals. Power to the lights is supplied through either a flat four pin or a round seven blade connector. Easy Load will install either so as to match the trike transporting vehicle. We limit the carry weight of the ELT-XL to 145 pounds.
The ELT-XL function is the same as the ELT. It is the same 13 pieces except the Center Tube, Receiver Hitch Insert and Wheel Chocks are made of steel. The Center Tube being made of steel increases the ELT-XL weight to ~51 pounds. The remaining 10 pieces are aluminum. Unlike the ELT the Wheel Channels and Ramps are ~5″ wide to accommodate tat tires and the extreme wheel camber of some hand cycles.
The ELT-XL rotates to vertical on a 1/2″ clevis pin but the safety pin remains a 3/8″ clevis pin.
